Safety Training for Manufacturers

What’s included

• Safety culture and plant safety events
• Using technology to reduce workers’ comp costs
• Ergonomics and workplace safety

Wondering what OSHA 10 or OSHA 30 actually cover, or whether SCMEP issues the card directly? Read the full guide to OSHA training for manufacturing — OSHA 10 vs. 30 compared, and how South Carolina’s own state OSHA plan works.

OSHA’s lockout/tagout standard spells out a specific sequence for de-energizing equipment. Read our guide to lockout/tagout procedures — the 6-step and 3-step sequences, and group lockout.

“High voltage” means something different on a plant floor than at a utility substation. See our guide to high voltage safety in manufacturing — arc flash mechanics and NFPA 70E basics.

Rigging math is really just trigonometry with real consequences. Read our guide to rigging equipment and sling angles — why load factor changes so much with angle.

Permit-required confined spaces have their own atmospheric testing sequence and required roles. Read our guide to confined space entry — the OSHA 1910.146 thresholds and roles explained.

85 decibels is the exact line where a formal hearing conservation program kicks in. See our guide to hearing conservation programs — the audiogram schedule and what triggers it.

Not every safe-looking lift is actually safe. Read our guide to the NIOSH lifting equation — how task geometry drives injury risk more than raw weight.

A respirator program copied from another facility’s binder is a program that will fail its next audit. Read our guide to OSHA respiratory protection — fit testing types and building a site-specific written program.

ISO 45001 replaced OHSAS 18001 in a transition that ran through 2021. See our guide to ISO 45001 — what certification confirms and how it differs from OSHA compliance.

A maintenance crew erecting structural steel faces a different fall protection threshold than a crew doing routine facility work. Read our guide to fall protection standards — general industry vs. construction rules explained.

A light curtain stops a machine before a hand enters the danger zone, without blocking access to the point of operation. See our guide to safety light curtains — how presence-sensing satisfies OSHA 1910.212.

Every chemical container is supposed to tell the same story twice — on the label and on the Safety Data Sheet. Read our guide to OSHA HazCom and GHS labeling — how to read pictograms, signal words, and the 16-section SDS format.

Ground fine enough and suspended in the air, sugar, wood, and aluminum dust can ignite with the force of a detonation. See our guide to combustible dust hazards — the explosion pentagon and what NFPA 652 requires.

Safety glasses that don’t fit the job get left in a drawer by the second week. Read our guide to PPE requirements — eye, face, and hand protection under OSHA 1910.132.

A sling angle calculation tells you whether a load is rigged safely, not whether the operator is qualified to move it. See our guide to overhead crane operator certification — NCCCO’s written and practical exam requirements.

A job hazard analysis breaks a task into steps and asks what could go wrong at each one — before anyone gets hurt finding out the hard way. Read our guide to Job Hazard Analysis (JHA) — a practical walkthrough for manufacturing teams.

OSHA 1910.38 spells out exactly what an emergency action plan needs — most facilities miss at least one requirement. See our guide to emergency action plans — what 1910.38 actually requires.

Most manufacturing facilities don’t realize OSHA’s bloodborne pathogens standard applies to them until someone gets cut and a coworker helps clean it up. Read our guide to bloodborne pathogens exposure control — what OSHA 1910.1030 requires.

A fire extinguisher mounted on the wall for years doesn’t help if nobody’s ever pulled the pin. See our guide to fire extinguisher and fire prevention training — what OSHA 1910.157 requires.

A special hand tool doesn’t count as machine guarding on its own. Read our guide to OSHA 1910.212 machine guarding — acceptable guarding methods and where guards themselves become a hazard.

Forklift certification isn’t just a 3-year calendar reminder. See our guide to forklift certification requirements — what actually triggers refresher training.

Why this matters

Frequently asked questions

Is this OSHA certification training?

These are SCMEP-delivered safety culture and practice courses, not OSHA outreach certification — contact the training team to discuss your specific compliance needs.

Can this be delivered as a plant-wide event?

Yes — safety culture and plant safety events are designed to be delivered to a full team or shift, not just individually.

Does this cover ergonomics assessments for specific workstations?

The course covers ergonomics fundamentals — for a specific workstation assessment, contact the training team.